15
Figure 11: VLAN DHCP Settings
1.
If you are still unsure what VLAN IDs and ports apply to your local networks, contact your
support department.
2.
When complete, return to Establishing VPN Connectivity on Page 10.
Hub Mode
If no VLANs have been configured by your IS Department, all 8 Local LAN ports on the back of the
AT&T AC8200 are considered equivalent and selecting Local LAN Settings as shown in Figure 9 will
result in the basic Port Information display as shown in Figure 12 below. In this case, Local LAN
equipment can be plugged into any available port on the back of the AT&T AC8200. If you see this
page and you think that VLANs SHOULD have been configured, please contact your IS department.
When complete, return to Establishing VPN Connectivity on Page 10
