Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—40—
5.1.1 Connecting the AC-to-AC Adapter with Integrated HPAV to the DLC Cabinet
Follow these steps to connect the AC-to-AC Adapter with integrated HPAV to the DLC
Cabinet:
Action
Illustration
1.
Mount the HPAV to the wall, if
applicable. Anchor to screws in
the wall as shown.
2.
Connect the DLC HPAV Device to a power outlet.
NOTE:
The Power LED should turn solid green.
NOTE:
The WAN Port on the DLC should be connected to the Ethernet port on the
HPAV Device.
3.
If the customer has an existing home broadband router, go to the router and
connect an HPAV Device to a nearby power outlet.
NOTE:
Both the Power and PLC LEDs should turn solid green.
4.
Connect an Ethernet cable from the HPAV Device to an available Ethernet port on
the home broadband router.
NOTE:
The Ethernet LED on the HPAV Device should turn solid green, and then
will blink green indicating Ethernet connectivity over the HPAV network (only when
there is Ethernet traffic).