Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—131—
7.1.4 Arming the System—AWAY
NOTE:
Close all perimeter windows and doors before arming.
Press the AWAY key to arm all of the sensors, including perimeter and interior sensors.
The system generates an exit delay time period. The keypad chirps and the LCD
displays “Arming - Exit Now,” as shown in Figure 86.
Figure 86: Keypad ─ Arming - Exit Now
You should exit through the designated entry/exit door(s) before the exit delay time
period expires. You may disarm the system during the exit delay time period by entering
the four (4) digit Security Code. After the exit delay time period expires, the system is in
the Armed—AWAY mode, as shown in Figure 87. The ARMED (Red) LED is illuminated
and the LCD displays “Armed - AWAY”.
Figure 87: Keypad ─ Armed - AWAY