Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—26—
3.3.7 Swinger Shutdown
1. In order to change the Swinger Shutdown Trips, click the “Edit” button on the
Swinger Shutdown line.
2. Use the drop-down menu to select the desired Swinger Shutdown Trips.
3. Click the “Change” button.
4. Verify that the desired change has been made.
3.3.8 Exit Time Restart Enable
1. In order to activate Exit Time Restart, in the AM (Alarm Manager) Flags section,
select the “Exit time restart enable” box and a checkmark will appear in the box.
2. Click the “Change” button.
3. Verify that the desired change has been made.
3.3.9 Abort Sound On/Off
1. In order to Abort Sound, in the AM Flags section, click the “Abort sound on/off”
box and a checkmark will appear in the box.
2. Click the “Change” button.
3. Verify that the desired change has been made.
3.3.10 Chirp on Entry/Exit Door/Open Close
1. In order to activate Chirp on Entry/Exit Door/Open Close, in the AM Flags
section, click the “Chirp on entry/exit open close” box and a checkmark will
appear in the box.
2. Click the “Change” button.
3. Verify that the desired change has been made.
3.3.11 Enable Cross Zone 2
nd
Trigger by Same Device
1. In order to Enable Cross Zone 2
nd
Trigger by Same Device, in the AM Flags
section, click the “Enable Cross Zone 2
nd
Trigger by Same Device” box and a
checkmark will appear in the box.
2. Click the “Change” button.