background image

58

Appendix

Limited warranty

The AT&T brand is used under license - any repair, replacement or warranty service, and all questions 

about this product should be directed to our website at 

www.telephones.att.com

 or call 

1 (866) 288-4268

.

What does this limited warranty cover?

The manufacturer of this AT&T-branded product warrants to the holder of a valid proof of 
purchase (“CONSUMER” or “you”) that the product and all accessories provided in the sales 
package (“PRODUCT”) are free from defects in material and workmanship, pursuant to the 
following terms and conditions, when installed and used normally and in accordance with the 
PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for 
products purchased and used in the United States of America and Canada.

What will be done if the PRODUCT is not free from defects in materials and workmanship 
during the limited warranty period (“materially defective PRODUCT”)?

During the limited warranty period, the manufacturer’s authorized service representative repairs 
or replaces at the manufacturer’s option, without charge, a materially defective PRODUCT. If the 
manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the 
manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished 
PRODUCT of the same or similar design. The manufacturer retains the defective parts, modules, 
or equipment. Repair or replacement of the PRODUCT, at the manufacturer’s option, is your 
exclusive remedy. The manufacturer returns the repaired or replacement products to you in 
working condition. You should expect the repair or replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of 
purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the 
terms of this limited warranty, this limited warranty also applies to repaired or replacement 
PRODUCT for a period of either (a) 90 days from the date the repaired or replacement 
PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; 
whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, 
improper installation, abnormal operation or handling, neglect, inundation, fire, water, or 
other liquid intrusion; or
PRODUCT that has been damaged due to repair, alteration, or modification by anyone other 
than an authorized service representative of the manufacturer; or
PRODUCT to the extent that the problem experienced is caused by signal conditions, network 
reliability or cable or antenna systems; or
PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or
PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic 
serial numbers have been removed, altered or rendered illegible; or

1.

2.

3.

4.


Summary of Contents for EL51110






































































Reviews: