Test (Local Test)
cc
cbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbcc
c
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
ccbbbcc
bbb
To verify the operation of
the telephone’s visual and
audio warning signals
1
Remove the handset from the base
2
Hold down the ringer volume control buttons, both
cbbbbc
bbbb
and
cbbbbc
bbbb
, simultaneously, for at least two
seconds
d
The BATT, P, ON, MSG, STAT, and RANGE
icons light, and you hear a double beep emitted
from the handset
3
To exit the local test mode, release the volume
control buttons
or
return the handset to the base or turn off the
handset
Note: If the ringers do not sound or the indicators do
not appear, contact your system manager.
b
b
Transfer
cc
cbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbcc
c
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
ccbbbcc
bbb
To transfer a call to
another telephone
1
Press
cbbbbbbbc
bbbbbbb
Trans
d
Call appearance button for that call winks, and
present call is put on hold
d
Calling party cannot hear you
d
Second call appearance becomes active
2
Dial the number to which the call is to be transferred
Note: Remain on the line and announce the call if
desired; if there is no answer or the line is busy,
return to the held call by pressing its winking call
appearance button.
3
When the third party answers or when you hear the
other telephone ringing, press
cbbbbbbbc
bbbbbbb
Trans
again
4
Hang up or press the (unlabeled) Drop button
14