background image

MERLIN MAIL—ML System Programming

6. Choose one:

— [1] for “Open.” Skip to Step 13.

— [2] for “Closed.” Go back to Step 5 if there are additional days in

the schedule to be programmed; otherwise, skip to Step 16.

NOTE:

If you are programming the schedule for consecutive

days, press [#] to select the next day in the sequence.

— [3] for temporarily closed on the day selected. Go to Step 7.

The Closure Greeting Menu plays.

If you specify a temporary closing for today, the system

prompts you to confirm it. Press [9] for “Yes” or [6] for “No”.

NOTE:

— [*] [#] to quit.

Go back to Step 5.

7. Choose one of the following greetings:

— [1] to use the regular closed greeting (that is, the Automated

Attendant Service Night Greeting).

The system confirms that the business will be temporarily closed for the

chosen day(s) then prompts you to choose a day for programming.
Go back to Step 5.

— [2] to use a Temporary Closure Greeting.

The system plays the Temporary Closure Greeting Menu.

3-40 

Programming the Schedule

Summary of Contents for MERLIN MAIL

































































































































































































































Reviews: