MERLIN MAIL—ML System Programming
8. Select one of the following options:
To
Enter the Following
Assign Selector Code Action 1,
[1] then enter the extension
Selector Code Transfer, to this
number and [#] in response to the
Selector Code
prompt.
Assign Selector Code Action 2,
[2] then enter a submenu number
Play Submenu, to this Selector
and [#] in response to the prompt.
Code
Assign Selector Code Action 3,
[3] then enter the announcement
Play Announcement, to this
number and [#] in response to the
Selector Code
prompt.
Assign Selector Code Action 4,
Prompted Transfer, to this
Selector Code
[4]
Assign Selector Code Action 5,
Direct Extension Transfer, to this
Selector Code
[5]
Delete this Selector Code
[*][D] (or [*][3] ) then when
prompted, enter [9] to confirm the
deletion or [6] to cancel the
deletion.
The system prompts you to enter a Selector Code.
9. Repeat Steps 7 and 8 for each Selector Code to be added to this submenu.
10. [*][#] once all the Selector Codes have been added to this submenu.
The system prompts you to record the submenu script at the tone.
Programming the Automated Attendant Menus
3-65
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...
