MERLIN LEGEND System Programming
RECOMMENDATION:
Set the VMS Transfer Return Interval equal to the Transfer Return Interval.
If all stations are covered only by the MERLIN MAIL—ML system, the
VMS Transfer Return Interval should be set to a value greater than the
Coverage Delay. If any station has personal coverage and group
coverage by the MERLIN MAIL—ML system, set the VMS Transfer
Return Interval to a value greater than the sum of the Coverage Delay
and Delay Ring intervals.
■
The VMS Transfer Return Interval does not appear on a MERLIN
LEGEND Form.
■
The factory setting is 4 rings.
Step Instruction
MLX-20L
PC
1 .
Enter programming mode.
[Menu]
Sys Program
[S][P][M]
[Enter]
[any key]
[F1]
Exit
[F5]
2. Select Auxiliary Equipment.
AuxEquip
[F9]
3. Select Voice Messaging
VMS/AA
[F6]
System/Automated
Attendant.
4. Select Transfer Return.
TransferRtn
[F1]
5. Erase current number of rings.
[Drop]
[Alt] + [P]
6. Enter number of rings before
[n]
[n]
calls are returned from
Enter
[F10]
transfer.
7. To return to previous menu.
Exit
[F5]
4-6
Group-Assigned Features
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...
