Appendix B
11.
Enter the coverage group
[nn]
[nn]
number of the Night Service
Enter
[FIO]
Call Handling Extension.
12. Return to previous menu.
Exit
[F5]
Making the Night Only Call Handling
Extension the Principal User
To make the Night Only Call Handling extension the principal user, enter
programming mode and select
“LineTrunks.”
Go to the second screen off
the Lines and Trunk menu and select
“Principal User.”
For more details,
refer to the MERLIN LEGEND System Documentation.
Programming the MERLIN
MAIL—ML Night Only
Coverage Mailbox
If you are installing the MERLIN MAIL—ML system with MERLIN LEGEND
Communications System Release 1.0, 1.1, or 1.2i, and you are using Night
Only Call Handling, you must program an unused multiline station port to
receive calls not answered by the system operator.
The Night Only Call Handling Group Coverage extension must have a Class of
Service 15 so that coverage calls for this mailbox receive Automated
Attendant Service. Create a mailbox for the extension and program it for Class
of Service 15.
■
MERLIN MAIL—ML Form B: Voice Mailbox Assignments identifies
the Night Only Call Handling Group Coverage extension.
■
Set the MERLIN MAIL—ML Class of Service for the mailbox to 15.
Programming the MERLIN MAIL—ML Night Only Coverage Mailbox
B-5
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...
