Installation
Preparing the Site
The MERLIN MAIL—ML unit should be wall-mounted adjacent to the MERLIN
LEGEND processor, on the same wood mounting surface if possible. The
MERLIN MAIL—ML unit should be connected to the same branch circuit as
the MERLIN LEGEND processor.
WARNING:
If there is not sufficient room on the existing wood mounting surface,
either secure anew surface (apiece of plywood) or use wall studs to
install the MERLIN MAIL—ML unit. This ensures permanent mounting
and will prevent wall damage.
If the MERLIN LEGEND processor is connected to an uninterruptible power
supply (UPS) or surge protector, it is recommended that the MERLIN
MAIL—ML unit be connected to the same UPS or surge protector.
To help ensure trouble-free operation, maintain the following environmental
conditions:
■
Dust-free area (preferably in an office environment)
■
Relative humidity < 90%
■
No exposure to any liquids (avoid areas near drinking fountains,
coffee makers, and so on).
■
Temperature range recommendation: 60°F to 80°F (15.5°C to 26.6°C)
Preparing for Installation 2-5
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...
