MERLIN MAIL — ML
System Programming
3
In this chapter, you will program the MERLIN MAIL—ML system.
Program the MERLIN MAIL—ML features in the order in which they are
presented in this chapter. The MERLIN MAIL—ML system requires certain
programming information (for example, language selection) before it can be
programmed for other features (such as voice mailbox assignments).
Figure 3-1 illustrates the programming menus available from the
Administration Main Menu.
You will be using the system administrator’s extension and password to
program these features. Although the MERLIN MAIL—ML system provides a
default (factory-set) administrator extension and password, you should
change them at some point during the system programming. Note that you
must create a mailbox for the new system administrator before changing the
system administrator’s extension to that mailbox. After you change the system
administrator’s extension and password, be sure to use the new values
whenever you log on to the MERLIN MAIL—ML system.
Refer to Appendix A for a complete list of MERLIN MAIL—ML factory settings.
You should confirm a factory setting, as instructed in procedures, even if you
are not changing the parameter.
3-1
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...
