MERLIN MAIL—ML System Programming
Specifying Maximum Number of Digits
in an Extension
Specify the maximum number of digits (2, 3, or 4) in an extension or calling
group so that Automated Attendant Service will begin to transfer calls when
the number of digits entered by the caller equals the maximum length.
■
The MERLIN MAIL—ML factory setting is 2 digits.
■
MERLIN MAIL—ML Form A: System Parameters identifies the
maximum digits in an extension.
To specify the maximum number of digits in an extension, follow the
instructions below:
1. Log into the MERLIN MAIL— ML system as the system administrator.
The system administrator’s name plays; then the Voice Mail Activity Menu
plays.
2.
3.
4.
[9] to program the MERLIN MAIL—ML system.
The System Administration Menu plays.
[1] for System Parameters.
The System Parameters Menu plays.
[8] to specify the maximum length of an extension.
The current extension length plays.
5. Enter the number of digits (2, 3, or 4).
The new maximum number of digits plays back, followed by the System
Parameters Menu.
3-16
Programming MERLIN MAIL—ML System Parameters
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...
