MERLIN MAIL—ML System Programming
5. Enter the new system operator’s extension number followed by [#]
The new system operator’s extension number plays, followed by the System
Parameters Menu.
Assigning a General Mailbox Owner
You can change the General Mailbox owner factory settings.
■
These are the factory settings for the General Mailbox:
— General Mailbox owner: 10
— Mailbox number: 9999
— Password: 1234
■
The General Mailbox owner extension can be changed to any
extension. It is not necessary for the owner to also have a
subscriber mailbox. The mailbox number 9999 cannot be
changed. To change the password, log on as the General
Mailbox owner and press [6] to change the password.
■
MERLIN—ML Form A: System Parameters identifies the
planned General Mailbox owner extension.
To assign the General Mailbox owner extension, follow the instructions below:
1. Log into the MERLIN MAIL—ML system as the system administrator.
The system administrator’s name plays; then the Voice Mail Activity Menu
plays.
2. [9] to program the system.
The System Administration Menu plays.
3. [1] for System Parameters.
The System Parameters Menu plays.
Changing Factory-Set Mailboxes
3-33
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...
