14295 Rev. 0.9 9/3/04
17
Ogo Manual
3. Remove the battery, lifting it gently from the side opposite the contacts.
4. For more information about the battery and charging, see Section 11.
3.2.2. Connect
Charger
Connect the charger’s power plug into the charging socket on the front of your Ogo (Figure 9).
Figure 9:
Connect Charger
3.2.3. Charge
Battery
Charge your Ogo for twelve consecutive hours. For more information on Ogo’s battery status, see
Section 11.
Note: You can begin the Activation Wizard while your Ogo is being charged.
3.3. Powering On Your Ogo
Now that your Ogo is charging (or is fully charged), press the Power On/Off key:
When your device is powered on, you will see the screen shown in Figure 10. When your Ogo
connection is established, the Activation Wizard Welcome screen appears.
Figure 10: Connection Status