14295 Rev. 0.9 9/3/04
58
Ogo Manual
Are you sure you want to continue?
[OK]
[Cancel]
Note: Do not use this option unless you are sure this is what you want to do!
The Reset device option deletes All IM and e-mail accounts and all contacts information, and restores
all default settings (for sounds, alerts, etc.).
To reset the device, from the pop-up select OK and press Enter.
Confirm msg. delete: To have Ogo alert you when you delete a message, to confirm that you really
want to delete it, select Confirm msg. delete, then press Enter to select or clear the check box.
Prompt to add contacts: When you send an e-mail or SMS to an address that is not already in your
contact list, you can have Ogo ask whether you want to add that address to your contact list before
sending the message.
To be prompted to add new addresses to your contacts, select Prompt to add contacts, then press
Enter to select or clear the check box.
Restore canceled pop-ups: To restore canceled pop-ups, select Restore canceled pop-ups, then
press Enter to select or clear the check box.
10.4. Sounds Settings
Use the settings on the Sounds tab to control the different kinds of sounds your Ogo makes.
Volume: To set the volume level for sounds, select Volume, then use the inner ring of the 8-Way
Navigation key to move the level up or down. The volume level of Ogo’s sounds changes immediately
as you move from one level to the next. Nine volume levels are available.
Mute: To make Ogo operate silently, select Mute, then press Enter to select the check box.
Vibration: To turn vibration on or off, select Vibration, then press Enter to select or clear the check
box.
Key tones: To turn on or off the sounds Ogo makes whenever you press a key, select Key tones, then
press Enter to select or clear the check box.
Note: When you select Mute, all of Ogo’s sounds are muted, including key tones.
Alerticon sounds: To turn on or off the sounds associated with alerticons, select Alerticon sounds,
then press Enter to select or clear the check box.
Message events: To turn on or off the sounds Ogo makes when messages are received, select
Message events, then press Enter to select or clear the check box.
Presence events: To turn on or off the sounds Ogo makes when IM contacts come online, select
Presence events, then press Enter to select or clear the check box.
System sounds: Sound sequence for powering on; sound that plays when you close the two halves of
the Ogo.
10.5. Time & Date
When your Ogo is turned on, it automatically sets to the current time from the AT&T Wireless network.
If you are somewhere the network is not available, you can set the time and date manually using the
settings on the Time & Date tab.
Device Time: Device Time shows the time as it is currently set on your Ogo.
