Getting started
5
Headset base installation
For calls using the phone line
You can use your DECT cordless headset for calls through your
telephone line with or without a telephone. You can also plug
the headset directly into a telephone jack without the splitter. If
you plug the headset into a telephone line without a telephone
connected to the line, you will not be able to make calls.
Connect your headset to a telephone wall jack:
Use the included line splitter to connect the headset and your
telephone to the same telephone jack.
NOTE:
The headset base and headset do not have an external ringer. When
you receive calls, the headset earpiece plays an alert tone. If you have
telephones connected to the same telephone line as the headset base, you
can rely on the ringers of those telephones to alert you to incoming calls.
Plug the small end
of the headset
base power
adapter into the
POWER
jack
(green dot) at
the back of the
headset base.
•
Plug one end of the telephone
line cord into the
TEL WALL
JACK
(red dot) at the back of
the telephone base.
•
DSL filter (not included)
is required if you have
DSL high-speed Internet
service.
Telephone
line cord
Plug the other end
of the telephone line
cord into the line
splitter.
•
Plug the headset
base power
adapter into an
electrical outlet
not controlled by
a wall switch.
•
Line
splitter
Corded or
cordless phone
Plug the line splitter
into the telephone
wall jack (or DSL
filter if you subscribe
to DSL Internet
service).
•
Connect another
telephone line cord
between the telephone
and the line splitter.
•
