Phone mode
Operation
28
Headset ringer
The headset base and headset do not have an external ringer.
When you receive calls, the headset earpiece will play a ringer.
If you have telephones connected to the same telephone line
as the headset base, you can rely on the ringers of those
telephones to alert you to incoming calls.
To change the volume of the earpiece ringer:
Press
VOL+
or
VOL-
when the headset is not in use.
To turn off the volume of the earpiece ringer:
Press
VOL-
until you hear two beeps from the headset.
Temporary ringer silencing
Press
MUTE/
FLASH
to temporarily silence the ringer in the
headset earpiece. This silences the ringer without disconnecting
the call. The next incoming call rings normally at the preset
volume.
NOTE:
If you have more than one headset registered to the headset base,
both headset earpieces ring when there is an incoming call. Pressing
MUTE/
FLASH
on one headset only silences the ringer of that headset.
