28
Troubleshooting
If you have difficulty with your telephone, please try the
following suggestions. For customer service, visit our website at
www.telephones.att.com
or call
1 (800) 222–3111
.
In Canada, dial
1 (866) 288-4268
.
My headset doesn’t work at all.
Make sure the power cord is securely plugged in.
Make sure that the battery is securely installed in the
cordless headset.
Charge the battery in the cordless headset for at least three
hours. For optimum daily performance, return the cordless
headset to its charger when not in use.
Reset the headset. Power off the headset and then power it on.
Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless headset. Try
installing your headset base or telephone base as far away as
possible from these types of electronic devices.
You may need to purchase a new battery. Refer to page 6 of
this user’s manual.
There is no dial tone.
Try all the suggestions, as mentioned above.
Move the cordless headset closer to the headset base or
telephone base. You might have moved out of range.
Your telephone line cord may be defective. Install a new
telephone line cord.
Another phone on the same phone line may be in use.
If the previous suggestions do not work, disconnect the
headset base or telephone base from the telephone jack and
connect another phone to that jack. If there is no dial tone on
that phone either, the problem is in your wiring or telephone
service. Contact your telephone service provider.
•
•
•
•
•
•
•
•
•
•
•
Appendix