background image

97

Appendix

Troubleshooting

The PIN on the telephone base does not work.

The default PIN is 

0000

.

If you have changed the PIN, it will appear on the handset in the  
pairing process.

I cannot hear any audio on my telephone system when on a cell call.

Reset the telephone base. Unplug the unit’s electrical power. Wait for 
approximately 15 seconds, then plug it back in.
Turn off your cell phone, then turn it on again.

I cannot download contacts from my cell phone to my TL92151.

Make sure that your cell phone is paired and connected to the base.
Make sure you place your cell phone next to the base while downloading.
If your cell phone does not support the download, you can send the directory 
from your cell phone. The system can receive the directory automatically. See 
the user’s manual of your cell phone for more information.

I see duplicate entries in my downloaded directory.

If you see duplicate directory entries, you can delete them manually. 
Another option is to download again from either your SIM card or phone 
memory, but not both.

Some of my cell phone contacts were not imported to my TL92151.

Make sure to try copying the contacts from your SIM card to your cell 
phone memory first, then download from your phone memory. If that 
doesn’t work, try copying the contacts from your cell phone memory to 
your SIM card, then download from your SIM card. For more information on 
how to transfer contacts between your SIM card and your phone memory, 
refer to the user’s manual of your cell phone.

Can the TL92151 help the poor cell phone reception in my house?

If your cell phone has poor reception in your home, the 

TL92151 

cannot 

improve the reception. However, if you have a location in your house with 
better reception, you can leave your cell phone in that location while you 
use 

TL92151 

cell line. In order for this to work, the cell phone must be 

within 30 feet of the telephone base for optimal performance.




Summary of Contents for TL92151



































































































































Reviews: