background image

21

Bluetooth

Bluetooth setup

Download directory

You can download up to 4 cell phone directories (phonebooks) to your 

TL92151

 telephone system via Bluetooth wireless technology. Each 

downloaded directory can store up to 1,500 entries with up to 30 digits for 
each phone number and 15 characters for each name.

Before downloading a directory, make sure the cell phone is paired, active, 
and connected to your 

TL92151

. Make sure the handset battery is charged 

for at least 30 minutes.

Place your cell phone next to the telephone base when you download a cell 
phone directory to your TL92151.

To download a cell phone directory:

Press

 

MENU

 

on the handset when it is not in use.

Press

 CID

 or 

DIR 

to highlight 

Bluetooth

, then  

press

 

SELECT

.

Press 

CID

 or 

DIR 

to highlight 

Download dir

, then 

press

 

SELECT

.

If there is no cell phone paired to the system, the 
handset displays 

Device list is empty.

 Press 

OK

 to 

return to the Bluetooth menu.

Press 

CID

 or 

DIR 

to select a desired device, then  

press

 

SELECT

.

If the selected device is active but disconnected, the 
handset displays 

Cellular phone not connected

.  

Press

 

CONNECT

.

Press 

CID

 or 

DIR 

to highlight one of the following 

options:

Phone memory

 - download all contacts stored in your 

phone memory.

SIM card only

 - download all contacts stored in your SIM card.

Phone and SIM

 - download all contacts stored in both your phone 

memory and SIM card.

Press 

SELECT

. During the download, the handset displays the progress. All 

other idle system handsets display 

Downloading dir

.

Your cell phone may require a passcode. In this case the screen displays 

Check cellular. ENTER PASS CODE.

 Enter the cell phone passcode into 

the handset and press 

SET

 to save.

1.
2.

3.

4.

5.


BLUETOOTH

Add device 

    

Device list

Download dir
 BACK    SELECT

Directory
Caller ID log
Intercom

Bluetooth
 BACK    SELECT

DOWNLOAD DIR

D1:Cell Phone A     

D2:Cell Phone B

 BACK    SELECT

1

Summary of Contents for TL92151



































































































































Reviews: