53
Multiple handset use
Push-to-talk (PTT)
You can directly broadcast messages from one handset to the
speakerphone of one or all other handsets. Any handset called
can respond by pressing
PUSH TO TALK
to begin a two-way
communication. If only one handset is available or registered,
the handset screen shows
PTT requires two handsets
when you
press
PUSH TO TALK
.
Only one handset can talk at a time. To do so,
press and hold the
PUSH TO TALK
button.
You must release
PUSH TO TALK
, so the other person
can respond.
Only one PTT can be active at a time.
While PTT is in use between handsets, other handsets cannot
use the intercom feature but can access the answering system.
When you attempt to place a PTT call to another handset which is
accessing the answering system, your handset displays
Not available at
this time
.
PTT on/off
You can turn PTT on or off on each handset.
When on, the handset can begin and receive PTT calls.
When off, the handset can begin PTT calls but will not receive PTT calls
from other handset(s). The idle handset displays
No Incoming PTT
.
When you attempt to place a PTT call to another handset
that has the PTT feature turned off, your handset displays
Not available at this time
.
To turn PTT on or off:
Press
PUSH TO TALK
when the handset is not in use. The
PUSH TO TALK
menu displays.
Press
CID
or
DIR
to highlight
PTT On/Off
, then
press
SELECT
.
Press
CID
or
DIR
to highlight
On
or
Off
, then press
SELECT
to save. You hear a confirmation tone.
•
•
•
•
•
•
•
•
1.
2.
3.
PUSH TO TALK
HANDSET A 2
HANDSET B 3
Group
BACK SELECT
INCOMING PTT
On
Off
BACK SELECT