background image

Use caller ID to automatically  
set date and time ...............................44
Home area code ..................................45
Cell area code ......................................46
Dial mode ...............................................47
Web address .........................................47
QUIET mode ..........................................48
No line alert ..........................................49
Cell alert  ................................................49

Telephone operation

Telephone operation...............................50

Make, answer or end a  
home call ................................................50
Make, answer or end a cell call ....52
Silence the ringer ...............................53
Call waiting on the home line .....53
Call waiting on the cell line ..........53
Cell phone voicemail ........................54
Answer an incoming cell call  
while on a home call ........................54
Answer an incoming home call 
while on a cell call ............................55

Conference calls .......................................56

Conference home and cell calls ...56

Options while on calls ...........................58

Handset speakerphone ....................58
Volume control ....................................58
Mute ..........................................................59
Temporary tone dialing ...................59
Hold ...........................................................60
Equalizer ..................................................60
Chain dialing .........................................61

Redial..............................................................63

Last number redial .............................63
Dial a redial entry ...............................63
Insert the area code to  
the redial number ...............................64
Save a redial entry to  
the directory .........................................65
Delete a redial entry .........................66

Handset locator .........................................67

Multiple handset use

Join a call in progress ...........................68
Intercom ........................................................69

Initiate an intercom call ..................69
Answer an intercom call .................71
End an intercom call .........................71
Answer an incoming call  
during an intercom call ...................72

Call transfer using intercom ...............73
Push-to-talk (PTT) ....................................76

Turn PTT incoming signal  
on or off ..................................................76
PTT call to a single device .............77
PTT call to multiple devices ..........79
Answer a PTT call ...............................81
Change a one-to-one PTT call  
to an intercom call ............................82
Answer an incoming call 
 
during PTT ..............................................82
Make an outgoing call  
during PTT ..............................................83
End or leave a PTT call ....................83

Directory

About the directory .................................84
Create and review entries ....................85

Create a new entry in the  
home directory ....................................85
Add a predialed telephone  
number to the directory ..................88
Review the directory .........................89
Search by name...................................90
Dial a directory entry ........................90

Edit or delete entries .............................91

Edit a directory entry ........................91
Edit the label of  
a directory entry .................................93
Delete a directory entry ..................93
Remove a downloaded 
 
directory ..................................................93

 

Summary of Contents for TL96276





















































































































































































Reviews: