7
Input Connector
Binding Posts/4mm Sockets (Tri-Wire capable)
Sensitivity @ 1 Watt/metre
85dB
Nominal Impedance
8 ohms
Recommended Power Amplifier:
100 - 1500 Watts
Drivers:
HF
MF
LF
Amplitude Linearity ±2dB
Cut-off Frequencies
(-6dB free standing)
Matched Response
Dispersion:
Horizontal
Vertical
Max Continuous SPL
Crossover Frequencies
Input Connector
Input Sensitivity
Sensitivity Trim
Input Impedance
Amplifier Output:
LF continous
MF continous
HF continous
Overload Protection
Bass Boost
Cabinet Dimensions (HxWxD)
OverallWeight
Power Requirements:
Voltage
Frequency
Stands/Brackets
Cabinet Finishes
SCM50ASL
SCM100ASL
SCM150ASL
SCM25A Pro
SCM110ASL
25mm (1")
75mm (3")
234mm (9")
70Hz – 12kHz
38Hz & 20kHz
±0.5dB
±80° Coherent
±10° Coherent
1
dB SPL @ 1 metre
09
200 Watts
100 Watts
50 Watts
Active
omentary Gain Reduction on all
.
peak m
channels, r.m.s. power limiter on h.f. channels
0 to +6dB @ 40Hz
717 x 304 x 480mm
48.9kg (107.5lb)
100, 115,
230V
220 -
50/60Hz
Floor stands included with Hi-Fi products only
All products: Standard real wood veneers are available in Black Ash, Mahogany, Cherry and Natural Oak.
Other veneers and finishes can be supplied to special order.
25mm (1")
25mm (1")
25mm (1")
25mm (1")
75mm (3")
75mm (3")
75mm (3")
75mm (3")
314mm (12")
164mm (7")
314mm (12")
±0.5dB
±0.5dB
±0.5dB
±0.5dB
47Hz & 22kHz
60Hz - 12kHz
65Hz - 12kHz
7 Hz – 1 kHz
4
7
65Hz - 12kHz
32Hz & 20kHz
25Hz & 20kHz
32Hz & 20kHz
±10° Coherent
±10° Coherent
±10° Coherent
±10° Coherent
±80° Coherent
±80° Coherent
±80° Coherent
±80° Coherent
112dB SPL @ 1 metre
115dB SPL @ 1 metre
117dB SPL @ 1 metre
115dB SPL @ 1 metre
380Hz and 3.5kHz, 4th order, critically damped with phase compensation
Female XLR
1V rms (0dBV/1.1dBu) balanced (referenced to full output)
0 to -6dB (Pro Versions only)
10k Ohms per leg
150 Watts
60 Watts
25 Watts
200 Watts
200 Watts
200 Watts
100 Watts
100 Watts
100 Watts
50 Watts
50 Watts
50 Watts
834 x 400 x 585mm
884 x 498 x 568mm
834 x 400 x 585mm
264 x 430 x 408mm
64.8kg (142.5lb)
64.8kg (142.5lb)
75.0kg (165.3lb)
30.0kg (66lbs)
115/220 - 230V
Internally set
Internally set
0 to +3dB @ 40Hz
ASL Monitors
SL Monitors
Drivers:
HF
MF
LF
Amplitude Linearity ±2dB
Cut-off Frequencies
(-6dB free standing)
Matched Response
Dispersion:
Horizontal
Vertical
Max Continuous SPL
Crossover Frequencies
Cabinet Dimensions (HxWxD)
OverallWeight
Stands/Brackets
Cabinet Finishes
SCM50SL
SCM100SL
SCM150SL
SCM110SL
234mm (9")
70Hz – 12kHz
38Hz & 20kHz
717 x 304 x 480mm
41.1
90.5
kg (
lb)
Floor stands included with Hi-Fi products only
All products: Standard real wood veneers are available in Black Ash, Mahogany, Cherry and Natural Oak.
Other veneers and finishes can be supplied to special order.
25mm (1")
25mm (1")
25mm (1")
25mm (1")
75mm (3")
75mm (3")
75mm (3")
75mm (3")
314mm (12")
314mm (12")
±0.5dB
±0.5dB
±0.5dB
±0.5dB
60Hz - 12kHz
65Hz - 12kHz
65Hz - 12kHz
32Hz & 20kHz
25Hz & 20kHz
32Hz & 20kHz
±10° Coherent
±10° Coherent
±10° Coherent
±10° Coherent
±80° Coherent
±80° Coherent
±80° Coherent
±80° Coherent
112dB SPL @ 1 metre
115dB SPL @ 1 metre
117dB SPL @ 1 metre
115dB SPL @ 1 metre
380Hz and 3.5kHz, 4th order, critically damped with phase compensation
834 x 400 x 585mm
884 x 498 x 568mm
834 x 400 x 585mm
57.0kg (126.5lb)
57.0kg (126.5lb)
67.2kg (148.1lb)
375mm (15")
374mm (15")
SCM
50/100/
150
25/
110/
S p e c i f i c a t i o n s
90dB
88dB
88dB
50/60Hz
Specifications comply with the following standards: Australian Standard Specification No 1127 "Sound System Loudspeakers" Part 5, IEFE Specification Standard No 219-1975
Acoustic Transducer Co. is a trading name and ATC is the registered trade mark of Loudspeaker Technology Ltd.
E. & O.E. The policy of ATC is that of continuous design and development. ATC reserves the right to alter products and specifications without prior notice.
