background image

VARENA

 

A73023342 

 

13

 

5.4. 

Temperature display 

The room temperature is normally displayed on the TFT display. The set point temperature is only 
displayed when the user attempts to change it; after the setting has been adjusted the display will 
revert to the room temperature: 
 

 

 

 

 

 

 

 
The 

comfort

 and 

eco 

set point temperatures can be modified both from comfort and economy 

modes. The comfort and eco mode can be changed within program mode if they are active at the 
time (the anti-frost set point can never be modified). 
 

5.5. 

Edit day, time and program 

To edit the day, time and program, press and hold the 

mode

 key for 2.5 seconds (from any mode) 

until the clock icon appears on the screen: 
 

Editing of the day of the week, time and program starts. This screen will also 
be  automatically  displayed  when  the  radiator  loses  the  time  after  being 
disconnected from the power supply for more than 4 days. 
 
First,  the  day  of  the  week  is  selected  with  the 

and 

+

  keys  (indicated  by  a 

flashing box). To confirm and set the day, press the 

OK

 key and the radiator 

now asks for the hour of the day by flashing the hour digits. 
 
To change the hour, use the 

-

 and 

+

 keys. To confirm and set the hour, press 

the 

OK

 key. When the minute digits are flashing, change to the appropriate 

time with the 

-

 and 

+

 keys and confirm by pressing the 

OK

 key. The radiator 

will now edit the program. *

Note: If the radiator had simply lost the time and day, it does not enter the 

program, but returns to the last active mode

.  

 
In the program editing screen, information about the selected interval and its set point temperature 
are displayed at the top. 
 
For example "PROG. D: 1 00h-01h" indicates day 1 of the week and 
hour from 00h to 01h. 
 
"18.0 °C" indicates the set point temperature of day 1 from 00h to 01h, 
which in this case is the eco set point. The "00h-01h" interval is flashing 
to indicate that it can be modified with 

-

 and 

+

 keys. 

 
At the bottom of the screen a 24 bar chart is displayed corresponding to one full day divided in 
the 24 intervals of 1 hour. The bar of the selected interval has a small triangle just above it and is 
flashing to indicate that it can be modified with the 

mode

 key. The length of each bar indicates 

the mode: 
 

Tall bar= 

Comfort. 

Mid length bar = 

Economy.  

Short length bar = 

Heating off.

 

 

 

Summary of Contents for VARENA 1000





















Reviews: