AX1600P User Manual
www.atcom.cn
Email: support@atcomemail.com
7
Chapter 5 Software Configuration
1. Create the configuration messages
Please use the “dahdi_genconf” command to configure the “/etc/dahdi/system.conf” file and
generate “/etc/asterisk/dahdi-channels.conf” file.
It will not show any messages if the “dahdi_genconf ” command run successfully.
[root@localhost ~]# dahdi_genconf
After that, users will get the following configuration in the “/etc/asterisk/system.conf” file.
----------------------------------------------------------------------------------------------------------------
# Span 1: WCTDM/16 "Wildcard TDM400P REV E/F Board 17" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
... ...
... ...
fxsks=15
echocanceller=mg2,15
fxsks=16
echocanceller=mg2,16
# Global data
loadzone
= us (According to your country)
defaultzone
= us (According to your country)
Users will get the configuration messages in the “/etc/asterisk/dahdi-channels.conf” file also.
----------------------------------------------------------------------------------------------------------------
; Span 1: WCTDM/16 "Wildcard TDM400P REV E/F Board 17" (MASTER)
;;; line="1 WCTDM/16/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default
;;; line="2 WCTDM/16/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
