IPPBX IP02 User Manual
~ 6 ~
ATCOM TECHNOLOGY CO., LIMITED
Static IP
Set an IP address manually according to the real network environment. If IPPBX is behind a router, the gateway
is usually set to the IP of the router.
PPPoE
IPPBX will obtain an IP address automatically after establishing a connection to PPPoE server with username
and password.
2.3 LAN Settings
DHCP
Yes: IPPBX will get an IP address from DHCP server, Not recommended.
No: Configure IP address manually for LAN. Default is NO.
NAT
Yes: IPPBX will act as a router, all the devices connected to LAN can access the network connected to WAN.
Default is Yes.
No: Networks connected to LAN and WAN are independent.
NOTE
:
IP addresses of LAN and WAN can’t be in the same network.
For example: IP of WAN is 192.168.1.100/255.255.255.0, IP of LAN can’t be 192.168.1.xx/255.255.255.0
Hostname
Summary of Contents for IPPBX IP02
Page 1: ...IPPBX IP02 User Manual For Firmware Version V3 0 2013 12 11...
Page 45: ...IPPBX IP02 User Manual 43 ATCOM TECHNOLOGY CO LIMITED 2 Set inbound route for FXO trunk...
Page 65: ...IPPBX IP02 User Manual 63 ATCOM TECHNOLOGY CO LIMITED...
Page 69: ...IPPBX IP02 User Manual 67 ATCOM TECHNOLOGY CO LIMITED Finish...