11 12
Ω
Ω
Ω
Ω
MAX/MIN
1. Press the
MAX/MIN
key to activate the MAX/MIN
recording mode. The display icon "
MAX or MIN
" will
appear. The meter will go into manual ranging mode &
display and hold the maximum or minimum reading and
will update only when a new “max or min” occurs.
2. Press the
MAX/MIN
key and a blinking “
MAX
MIN
” will
appear. The meter will display the present reading, but will
continue to update and store the max and min readings.
To exit MAX/MIN mode press and hold the
MAX/MIN
key for 2
seconds.
Backlight Button
1. Press the BACKLIGHT button to turn the backlighting ON.
2. Press the BACKLIGHT button again to turn the backlighting
OFF.
Meter Functions - Voltage (V)
Select the
Volts “ V”
range with
the rotary switch.
The meter will automatically
select he best voltage (V) range.
Select DCV or ACV with the
MODE
button.
Insert:
Black lead in
COM
terminal.
Red lead in
V-
Ω
-RPM
terminal
Touch the Black probe to ground or
to the negative (-) circuit
Touch the Red probe to the circuit
coming from the power source
IMPORTANT: Voltage must be
measured in parallel (Red probe
measuring circuit from power
source).
WARNING
When measuring voltage,
be sure the Red test lead is
in the terminal marked “V”.
If the test lead is in an Amp
(A) or Milliamp (mA)
terminal, the meter can be
damaged and risk of
personal injury.
