2
SAFETY and GENERAL INFORMATION
Save these instructions.
For your safety, read, understand, and follow the information provided with and on this jack.
The owner and operator shall have an understanding of this jack and safe operating procedures before attempting
to use. The owner and operator shall be aware that use and repair of this product may require special skills and
knowledge. Instructions and safety information shall be conveyed in the operator’s native language before use of this
jack is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.
Inspect before each use.
Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
jack that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately. If the jack has been or suspected to have been subjected to a shock load (a load dropped suddenly,
unexpectedly upon it), immediately discontinue use until jack has been checked by an Atd Tools authorized service
center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual
inspection be done by qualified personnel. Replace worn or damaged parts and assemblies with Atd Tools Authorized
Replacement Parts only. Labels and Operator’s Manuals are available from manufacturer.
PRODUCT DESCRIPTION
Atd Tools Hydraulic Transmission Jack is designed to be used as an aid in the removal and installation of automotive
and light truck transmissions, transfer cases and transaxles. It is intended for use under an overhead lift or in a
garage pit.
Do not use for any purpose other than those uses outlined above.
Figure 1 - Transmission Jack Components
SPECIFICATIONS
Model
Capacity
Min.
Height
Max.
Height
Saddle Base
Extended Saddle
Area
Jack Size
(L x W)
Net
Weight
Atd-7432
1000-lb
36"
73"
9 7/8" x 9 7/8"
18 1/2" x 18 1/2" 34 1/2" x 34 3/8"
141 lb.
Saddle Bracket
Hydraulic Unit
Release Valve Pedal
Lift Pedal
Tilt Adjustment
Knobs
Caster
Nylon Strap
Position Handle
Oil Filler Plug
!
!"#
"pdfFactory Pro"
$#%&'(
www.fineprint.com.cn
Saddle Base
*Shipping/Vent Plug
*replace w/ vent plug
before initial use
Base half
Rear View
Bracket Bar
