Capacity:
1500
LBS.
Model: ATD-7461A
SETUP, OPERATION & PREVENTIVE MAINTENANCE (Cont.)
Ύ
Lowering
x
Raise the jack slightly and pull back on the safety link rod, disengaging the safety lock.
x
Ensure the en
Ɵ
re working area is clear of persons and limbs.
x
Press the release pedal slowly with your foot to allow for a controlled decent.
Maintenance
Ύ
NOTICE:
Before performing any service in this jack, the power unit should be removed from the base
plate and placed on a level surface. Use high grade hydraulic oil only. Never use brake
Ň
uid, motor oil,
transmission
Ň
uid, turbine oil or any other
Ň
uids. ISO-VG22 such as Mobil DTE-10 or equivalent hydraulic
oil is recommended.
Check and Re
Į
ll Oil
x
With the jack in the fully lowered, level posi
Ɵ
on, remove oil
Į
ller plug.
x
Proper oil level should be 1/4" below the oil
Į
ller plug hole.
x
Do not over
Į
ll. Always
Į
ll with new, clean hydraulic jack oil as recommended above.
x
Reinstall oil
Į
ller plug, then reinstall unit cover.
Lubrica
Ɵ
on and Cleaning
x
Clean and lubricate all moving parts and pivot points every 3 months.
Air Ven
Ɵ
ng Procedures
x
With the power unit in the fully retracted posi
Ɵ
on, remove oil
Į
ller plug.
x
Pump the foot pedal rapidly several times. Ensure proper oil level and reinstall oil
Į
ller plug.
x
Test power unit func
Ɵ
on and repeat above steps un
Ɵ
l trapped air is completely vented.
Altera
Ɵ
ons
Because of poten
Ɵ
al hazards associated with this type of equipment, no altera
Ɵ
ons shall be made to the
product.
A
Ʃ
achments and Adapters
Only a
Ʃ
achments and/or adapters supplied by the manufacturer shall be used.
4
