o
Change the number on the right by pressing DIS + or DIS –
o
Press Home Key
o
Below appears
o
Le
Ō
Right
o
“EL1” “###”
o
Use DIS + or DIS – to change the number on the right to 007
o
Press Home Key
o
Press Home Key
o
Un
Ɵ
l the reset is completed with a series of beeps
o
Turn the machine o
ī
and back on
22. FACTORY CALIBRATION
Below you would
Į
nd the detailed instruc
Ɵ
ons:
Press “Home key” one
Ɵ
me
,and it displays “[ P ]”, press “DIS + bu
Ʃ
on” one
Ɵ
me
, and you will see
“[ SET ]-[ UP ]”
Press “Home key” two
Ɵ
mes
, and it displays [POS—XXX], spin the wheel by hand (clock-wise or counter-clock-wise)
slowly. When it displays [POS]—[110] press the “High Accuracy Balance Key” one
Ɵ
me
ˈ
then con
Ɵ
nue to spin the
it displays [POS]—[120] Press “High Accuracy Balance Key” one
Ɵ
me.
The screen displays [ADD]-[ 0 ], press
or lower down the hood to start rota
Ɵ
on of the machine.
When machine stops rota
Ɵ
on, it displays [ADD]—[100] , At this
ƟŵĞ
, spin the wheel un
Ɵ
l the outer indica
Ɵ
ng lights are
all illuminated, clamp 100g /3.5 Oz calibra
Ɵ
on standard weight on the outside rim at 12 o’clock posi
Ɵ
on. Press
or lower down the hood to start rota
Ɵ
on of the machine.
When the machine stops, it displays “100—ADD”. At this
ƟŵĞ͕
remove that 100g /3.5 Oz standard weight from the
outside rim edge
Į
rst, then spin the wheel by hand un
Ɵ
l the inner indica
Ɵ
ng lights are all illuminated, clamp that
100g / 3.5 Oz standard weight on the inside rim at 12 o’clock posi
Ɵ
on, press
or lower down the hood to start
the rota
Ɵ
on again. When it stops, you will hear 3
Ɵ
mes beeps indica
Ɵ
on and the factory calibra
Ɵ
on is over.
,
wheel slowly un
Ɵ
l
18
