2
SAFETY and GENERAL INFORMATION
Save these instructions.
For your safety, read, understand, and follow the information provided with and on this
jack before using. The owner and/or operator of this equipment shall have an understanding of this jack and safe
operating procedures before attempting to use. The owner and/or operator shall be aware that the use and repair of
this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the
operator’s native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of
this jack, remove from service immediately.
Model
Capacity
Jack Size (L x W)
Min.
Height
Max.
Height
Handle
Length
Weight
ATD-7325
2 Ton
42-1/2" x 13-3/4"
2-1/2"
20"
52"
121 lbs.
!
ATD SwiftLift
™
Low Profile Service Jack is designed to lift, but not support one end of a vehicle. The jack must be
used in conjunction with a pair of appropriately rated jack stands. The SwiftLift
™
Service Jack has a unique feature
which provides fast, no load lifts to the jacking point, at which time it lifts in approximately 0.75~2” increments.
NEVER use a hydraulic jack as a stand-alone device. After lifting, immediately support the lifted vehicle
with a pair of appropriately rated jack stands.
SPECIFICATIONS
Inspect before each use.
Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
jack that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
suddenly, unexpectedly upon it), immediately discontinue use until jack has been checked by a factory authorized
service center (contact distributor or manufacturer for list of authorized service centers). It is recommended that an
annual inspection be done by qualified personnel. Labels and Owner’s Manuals are available from the manufacturer.
