6) The voltage should not exceed 0.75V in any location and the current leakage must not exceed 0.75mA.
* service precautions
1) When inserting the part or circuit board, you must keep the lead wire fixed to the end before soldering.
2) When inserting the high power resistance, leave about 10mm clearance from the board (metal oxidation
coated resistance or metal coated resistance).
3) Parts with high voltage or high temperature must be kept far from the lead wire.
4) For this chassis, use the cold chassis or insulation transformer for the safety. When repairing the power part,
always use the insulation transformer.
5) When operating the TV, do not connect or remove the wire.
6) Marked parts are important parts to maintain the safety of the part. Therefore, when exchanging the part,
always use the designated part.
S
2. Product Specification.
* Scope
This specification applies to all LCD TV models with VCB4430 chassis.
* Operating condition
1) Surrounding temperature: 25℃ ± 2℃
2) Relative humidity: 65% ± 10%
3) Power voltage (AC 110 – 240V, 50/60Hz)
4) For measurement, pre-operate the TV for more than 15 minutes.
◆ General Specification.
Summary of Contents for AV32OPD
