Hardware Setup
Hardware Setup
Windows 98, Windows 98SE or Windows 2000 users
Please perform software setup first before proceeding to
hardware setup.
External Setup
To set up PRO III reader externally, simply use External USB
cable to connect PRO III reader to the USB 1.1 or USB 2.0
port of your computer. USB ports are usually located at the
back of your computer, next to the keyboard and mouse
connectors.
9
8
7
It is not necessary to shut down your computer to make this
connection. As soon as PRO III reader is connected to your
USB port, your computer shall detect this reader device and
start to build up its driver automatically.
To computer USB port
External USB cable
Internal Setup
Internal setup requires your computer case cover to be
removed. Like a standard 3.5" floppy drive, PRO III reader
has 3 screw holes on both sides. Insert PRO III reader into
one of the empty external 3.5" drive bay and align PRO III
reader bezel evenly with your computer front bezel. Apply
screws on both sides to secure the reader into drive bay.
Use Internal USB cable to connect PRO III reader to the
USB pin header on your motherboard. Connect molded end
of the cable to the USB connector at the back of PRO III
reader.
To Motherboard USB header
Internal USB cable
Internal IEEE 1394
(Firewire) cable
Optional
connection
Software Setup
Windows ME or Windows XP users
Please DO NOT install any software driver or use the setup
driver file in PRO III Setup CD. Proceed to Hardware setup
directly.
(1) Close all applications that are currently running in your
computer, including applications running in background.
(2) Insert PRO III Setup CD into you CD ROM drive and
locate a "setup.exe" file in "PC" folder.
(3) Double click on "setup.exe" file will lead you into setup
program.
(4) Follow setup instruction on your screen.
(5) After driver files are copied into your system, setup
program will prompt you to select if you want to restart your
computer. Please select "Yes, I want to restart my computer
now" and click on [Finish] button to restart your computer.
(6) Once computer is restarted, you can proceed to
Hardware Setup.
<<<To Remove PRO III Driver from your computer>>>
In case if you want to remove PRO III setup driver from your
computer, please follow the steps below :
(1) Go to [My Computer] [Control Panel] [Add/Remove
Programs] and select "USB Mass Storage Reader", then
click on [Add/Remove] button.
(2) Follow the instruction on your screen.
Continued
