3.2.4.Machine should be operated only by staff members, who have read and understood the contents of this
manual.
3.2.5.All directives, recommendations and general safety rules contained in this manual have to be observed
fully. The
machine cannot be operated in any way for purposes other than those described herein.
Otherwise, the
manufacturer shall not be deemed responsible for any damages or injuries. And such
circumstances would lead to the termination of the warranty.
3.3.
General Safety Information
3.4. Safety Symbols And Meanings
1.
The power cable should be led in such a way that nobody can step on it or
nothing can be placed on it. Special care be taken regarding the inlet and
outlet sockets.
2.
If the power cable should be damage during operation, don’t touch and
unplug it. Never use damaged power cables.
3.
Don’t overload machines for drilling and cutting. Your machine will operate
more safely with power supply in accordan CE with the stipulated values.
4.
Don’t place your hands between parts in motion.
5.
Use prtective eye glasses and ear plugs. Don’t wear oversize clothes and
jewels. These can be caught by moving.
6.
Keep your working place always clean, dry and tidy for accident prevention
and safe operation.
7.
Use correct illumination for the safety of the operator. (ISO 8995-89
Standard The Lighting of Indoor Work System)
8.
Don’t leave anything on the machine.
9.
Don’t use any materials other than those recommended by the
monufacturer for cutting operations on the machine.
10.
Ensure that the work piece is clamped appropriately by the machine’s
clamp or vice.
11.
Ensure safe working position, always keep your balance.
12.
Keep your machine always clean for safe operation. Follow the instructions
at maintenance and replacement of accessories. Check the plug and cable
regularly. If damaged, let it replace by a qualified electrician. Keep handles
and grips free of any oil and grease.
13.
Unplug first, before conducting and maintenance works.
14.
Ensure that any keys or adjustment tools have been removed before
operating the machine.
15.
If you are required to operate the machine outside, use only appropriate
extension cables.
16.
Repairs should be carried out by qualified technicians only. Otherwise,
accidents amt occur.
17.
Before starting a new operation, check the appropriate function of
protective devices and tools, ensure that they work properly. All conditions
have to be fulfilled in order to ensure proper operation of your machine.
Damaged protective parts and equipment have to be replaced or repaired
properly (by the monufacturer or dealer).
18.
Don’t use machines with improper functioning buttuons and switches.
19.
Don’t keep flammable, combustive liquids and materials next to the
machine and electric connections.
Electric warnings.
Use protective goggles.
!
!
11
