14
You can access the desired values by pressing the directional keys next to the cut list line number indicator to go to the
existing measurement values in the "CUTTING LIST". When you reach the desired value, press the "CLAMP" button and tighten
the clamps. You can then start the process by closing the top cover and pressing the "START" button.
NOTE : If the value written in the quantity section is completed, the machine will automatically switch to the next recipe in the
memory and wait for you to put the profile and press the “CLAMP” button.
7.2.1.
Recipe
When you press the recipe button, you can create a new recipe, or you can access the values you prepared before and
make changes by cutting the values. Use the arrow keys next to the screen to access the existing values. To create a new recipe,
fill in the relevant places. Press “AUTOMATIC CUTTING” button to proceed and continue the steps as stated above.
(7.2.
Automatic Cutting)
To make a recipe, you can also directly access this page by clicking the "RECIPE" button on the main page.
7.2.2.
Cutting List
It is the section where the recipes of the created recipes are displayed. Select the operation to be performed in this section,
press the “AUTOMATIC CUTTING” button and continue the steps as stated above.
(7.2. Automatic Cutting)
7.3.
Manual Cutting
When you want to cut with “MANUAL CUTTING”, write the desired workpiece size in “CUTTING MEASURE” and “CUTTING
HEIGHT”. Then, enter the "CUTTING SPEED" value for the ideal cut. After entering the required values, first press the "CLAMP"
button and then the "START" button. After the cutting process, the vices will open automatically, you can get your profile.
7.4.
Settings
Profile QTY
Cut Speed
Length measure to
be cut
Profile Name
Cut QTY
Profile Height