3
1.
GENERAL INFORMATION
1.1.
Introduction
The user’s manual given by the manufacturer contains information about the machine parts. Each machine operator
should read these instructions carefully, and the machine should be operated after fully understanding them.
Safe and efficient long-term use of the machine depends on understanding and following the instructions contained in
this manual. The technical drawings and details contained in this manual constitute a guide for the operator.
1.2.
Distributor
ATECH MACHINE, INC.
www.ATechMachinery.com
Ph.: +1-240-505-1967
E-mail : info@ATechMachinery.com
*In case of any technical problem please contact your nearest ATECH dealer or ATECH head office through the above
mentioned phone or e-mail address.
*Technical labels with the model description of the machine are attached onto the front side of each machine.
*The machine serial number, motor values, air pressure, air consumption and production date are printed on the technical
label.
2.
MACHINE’S DESCRIPTION AND TECHNICAL FEATURES
2.1.
Machine’s Description
It is an automatic 20” straight upcut saw designed for serial cutting of (slicing) of aluminum profiles with a Ø500 mm (20”)
saw blade.
➢
The machine has been designed in compliance with UL & CSA Safety Directives.
➢
With the servo control system, time saving is achieved with profile feed speed and saw cutting height control.
➢
It is possible to precisely adjust the cutting speed infeed according to the type of material.
➢
During the cutting process, if the top safety guard is opened, the saw will not start cutting, and returns to start
position in case it is opened during the cutting process fopr safety reasons.
➢
In manual cutting mode, it cuts the desired size and automatically stops and waits in the ready position.
➢
In the automatic cutting process, after the number of cutting operations is completed, the machine stops
automatically and moves to the next memory and waits in the ready position.
STANDARD ACCESSORIES
Ø500 mm (20”) Saw Blade
KN-M3 Conveyor
Screw Shaft Lubrication Unit
3 Qty. Vertical Pneumatic Clamps
3 Qty. Horizontal Pneumatic Clamps
Spary Mist Lubrication System
Air Gun
2 Qty. Chip Collector Manifolds
OPTIONAL ACCESSORIES
Automatic Opening Top Guard
Industrial Type Chip Collector VCE 1570
