1.1 Performance and features
H
With a COP value up to 5.0 our heat pumps are very efficient when transferring heat from the air to
the swimming pool water. You can save as much as 80% of cost compared to an electrical heater.
Long life-span
The heat exchanger is made of PVC & Titanium tube, which can withstand and prolong exposure to
swimming pool water
Easy
igh efficiency
.
control and operation
The unit is very easy to operate: simply switch it on and set the desired pool water temperature.
The system includes a micro-computer controller, allowing all operation parameters to be set.
Operation status can be displayed on the controller with LCD display.
Heat exchanger
Water flow in
Water flow out
Evaporator
Air flow
Compressor
Air flow
Cooler
De-energized Air
Warm
Air
Fan
Evaporator
(Energy Collector)
Capillary Tube
Condenser
(Water Heat Exchanger)
Pool Filter
Pump
Compressor
Swimming pool
1.2 System diagram
1. Performance data and specifications
1
SWIMMING POOL HEAT PUMP
SWIMMING POOL HEAT PUMP
Heat pumps utilize the sun
'
s free heat by collecting and absorbing energy from the outside air. This
energy is then compressed and transferred to the pool water. Your existing water pump circulates the
water through the heater, usually next to the pool equipment, and the water warms up. The heat pump
timer could be set to operate during daylight hours, for example, usually 9am to 5pm.
The unit contains a fan that draws in outside air and directs it over
the
surface of the EVAPORATOR
(energy
collector).The
liquid refrigerant within the EVAPORATOR coil absorbs the heat from the
outside air becomes a gas.
The warm gas in the coil passes through the COMPRESSOR concentrating and increasing the heat to
form a very hot gas which then passes to the CONDENSER (water
heat
exchanger).It
is here that the
heat exchange occurs as the hot gas gives off heat to the cool swimming pool water circulating through
the coil
.
The pool water becomes warmer, and the hot gas cooling as it flows through the CONDENSER coil-
returns to its liquid form and, after passing on through the CAPILLARY
TUBE
,
the
whole
process
begins
again
.
The state of the heat pump technology can efficiently collect heat from the outside air down to the
7℃
to
10 range.For tropic and subtropical climates,this means that the pool can be maintained at 26
℃
to 32
℃
