7
To gurantee the efficiency of the machine and for its correct functioning is essential to carry out routine cleaning and
maintenance.
Routine maintenance must be carried out by the user according to the maker’s instruction.
Before starting any cleaning or maintenance switch off the main switch and remove the mains plug from socket.
EVERY DAY...
Clean and grease the flansh.
EVERY MONTH...
Check the oil level of the hydraulic system.
EVERY 6 MONTHS...
Grease the bearings.Make a general check.
EVERY YEAR...
General Check:
Visual inspection of all structural parts and mechanisms to qurantee that there are no problems or
anomailes.
Electric Plant:
Skilled electricians should test the electric plant.
The machine is provided without oil in the hyraulic unit.Put some oil till the level to the hydraulic unit
from the oil can that you can find in your accessories box provided with your machine.
Use only SHELL TELLUS 46 in the hydraulic unit
Run the machine idle for 10 minutes during the winter months. Start work later please.
THE MACHINE IS GURANTEED (1 YEAR) ;
IN ALL CASES CONTACT THE ASSISTANCE SERVICE OF HATCO. FOR PROMPT ASSISTANCE IT IS
IMPORTANT AT THE TIME OF THE CALL TO SPECIFY THE MACHINE MODEL, THE PRODUCTION NO.
(FOUND ON THE REGISTRATION PLATE) AND TYPE OF MALFUNCTION.
***THE MOTORS ARE NOT UNDER WARRANTY.
WHEN REPLACING PARTS AND MAKING REPAIRS COMPLY WITH ALL THE SAFETY PRECAUTIONS.
TO ORDER SPARE PARTS
:
INDICATE THE SERIAL NUMBER OF THE MACHINE AND THE YEAR BUILT.
INDICATE THE CODE OF THE PIECE REQUESTED.
INDICATE THE QUANTITIY REQUIRED
.
ROUTINE MAINTENANCE
THERE IS NO OIL IN THE HYDRAULIC UNIT
WARNING
ANY WORK ON THE ELECTRICAL, HYDRAULIC AND PNEUMATIC SYSTEMS MUST BE CARRIED
OUT ONLY BY
PROFESSIONALLY QUALIFIED PERSONNEL.
TECHNICAL ASSISTANCE AND SPARE PARTS
WARNINGS
USE ONLY ORIGINAL PARTS OF
THIS MACHINE
THE MANUFACTURER TAKES NO RESPONSIBILITY OF THE NONORIGINAL PARTS