5
SAFETY WARNINGS
- Take care that the
voltage of the network of electrıcıty. ıt must be same voltage value ındıcated on the machıne
label.
-
Have an electrıcıty tachnıcıan ınstall the thermal swıtch before the electrıc socket accordıng to the type of the
electrıc motor on the machıne.
- Read the manual absolutely before the operat
ıng the machıne.
-
Don’t hold the hexagonal shaft of your machıne.
-
Don’t use your machıne wıthout glasses and gloves.
-
Don’t permıt the use your machıne by the uneducated personal.
-
Keep far your hands when machıne ıs workıng.
- Make sure that do not open the Electric panel cover ; It can cause accident and it can spoil the machine settings
because There is High Voltage and moving mechanical parts in the machine If it is urgent , Do call Technical
service
- During the Rim Polishing Do not put your hands Between Rim and Brush
- While making operation on the mirror , Do not put your hands between Rim Clamping Arm and the Rim
- While you are working on the flange
don’t put your hands between the dismantling foot and rim.
- While you are dismantling the tyres,
don’t insert your hand between the dismantling foot and rim.
- While you are working with the machine, if you heard any abnormal noise, please call the technical service.
- Protect the electric connection of the machine from physical and chemical damages.
don’t pass upper the cable
with any vehicle like forklift or tyred jack.
-
Don’t use the damaged cable because of any reason. change the cable immediately.
- Please keep your machine clean continuously.
- When you clean or maintain the machine
don’t use the pressured air, water, conductive or semi-conductive
cleaning materials. protect your machine from moisture and
don’t run the machine when the machine wet.
- Your machine was designed for tyre changing.
don’t use for the machine for the other purposes and don’t use the
machine with other equipments except the supplied
wıth the machine.
-
Don’t change the factory settings and don’t use non-original parts.
