KH1508i / KH1516i User Manual
106
Mouse Synchronization
Until you close the KH1508i / KH1516i connection, mouse movements have
no effect on your local system, but instead are captured and sent to the remote
system.
From time to time, especially if you change video resolution, the local mouse
movement may no longer be synchronized with the remote system's mouse
pointer. There are three quick methods that can be used to bring the two
pointers back into sync:
Right-clicking on the hammer icon in the Windows Client Control Panel.
Moving the mouse pointer into the Control Panel and back out again.
Performing an
Auto Sync
with the Video Adjustment function (see
, page 87, for details).
If performing these actions does not resolve the problem, do the following:
1. Invoke the
Adjust Mouse
function with the
Adjust Mouse
2. Move the local mouse pointer exactly on top of the remote mouse pointer
and click.
If this procedure still does not help, you should set the mouse speed and
acceleration for each problematic computer attached to the switch. see
Additional Mouse Synchronization Procedures
, page 147, for instructions.
kh15816i.book Page 106 Wednesday, December 26, 2007 11:12 AM
