KH1508i / KH1516i User Manual
38
Skip Mode
This feature allows you to switch between computers in order to monitor them
manually. You can dwell on a particular port for as long or as little as you like
- as opposed to Auto Scanning, which automatically switches after a fixed
interval. To invoke Skip Mode, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see page 34).
2. Key in
[Arrow]
Where [Arrow] refers to one of the Arrow keys. After you press
[Arrow], you automatically exit Hotkey Mode, and enter Skip Mode
where you can switch ports as follows:
Once you are in Skip Mode, you can keep on skipping by pressing the
Arrow keys. You don't have to use the [NumLock] + [-] combination
again.
While Skip Mode is in effect, ordinary keyboard and mouse functions
are suspended - only Skip Mode compliant keystrokes can be input.
You must exit Skip Mode in order to regain normal control of the
console.
3. To exit Skip Mode, press
[Esc]
or
[Spacebar]
.
←
Skips from the current port to the first accessible port previous to it.
(See
, page 27, for information regarding
accessible ports.)
→
Skips from the current port to the next accessible port.
↑
Skips from the current port to the last accessible port of the previous
Station.
↓
Skips from the current port to the first accessible port of the next
Station.
kh15816i.book Page 38 Wednesday, December 26, 2007 11:12 AM
