KH1508i / KH1516i User Manual
26
F3 SET
This function allows the Administrator and each User to set up their own
working environment. A separate profile for each is stored by the OSD and is
activated according to the
Username
that is provided during Login.
To change a setting:
1. Move the highlight bar to it, then press
[Enter]
.
2. After you select an item, a submenu with further choices appears. To make
a selection, move the Highlight Bar to it, then press
[Enter]
. An icon
appears before the selected choice to indicate which one it is. The settings
are explained in the following table:
(Continues on next page.)
Setting
Function
OSD HOTKEY
Selects which Hotkey activates the OSD function:
[Scroll Lock] [Scroll Lock]
or
[Ctrl] [Ctrl]
.
Since the Ctrl key combination may conflict with programs running
on the computers, the default is the Scroll Lock combination.
PORT ID
DISPLAY
POSITION
Allows you to position where the Port ID appears on the monitor.
The default is the upper left corner, but you can have it appear
anywhere on the screen.
Use the Arrow Keys plus Pg Up, Pg Dn, Home, End, and 5 (on the
numeric keypad with Num Lock off), to position the Port ID display,
then press
[Enter]
to lock the position and return to the Set
submenu.
PORT ID
DISPLAY
DURATION
Determines how long a Port ID displays on the monitor after a port
change has taken place. The choices are:
User Defined
- which lets you select the amount of time (from
0–255 sec.); and
Always On
- which displays the Port ID at all times.
If you select
User Defined
, key in the number of seconds, then
press
[Enter]
.
The default is 5 Seconds. A setting of 0 (zero) disables this
function.
PORT ID
DISPLAY
MODE
Selects how the Port ID is displayed: the Port Number alone
(
PORT NUMBER
); the Port Name alone (
PORT NAME
); or the
Port Number plus the Port Name (
PORT PORT
NAME
). The default is PORT PORT NAME).
kh15816i.book Page 26 Wednesday, December 26, 2007 11:12 AM
