KH1508i / KH1516i User Manual
72
Radius
The RADIUS dialog box allows you to set up login authorization for the
KH1508i / KH1516i through a RADIUS server:
To enable RADIUS authorization, do the following:
1. Check
Enable Radius
.
2. Fill in the IP addresses and Service Ports for the Primary and Alternate
RADIUS servers.
3. Set the time in seconds that the KH1508i / KH1516i waits for a RADIUS
server reply before it times out in the Timeout field.
4. Set the number of RADIUS retries allowed in the Retries field.
5. Key the
Shared Secret
character string that you want to use for
authentication between the KH1508i / KH1516i and the RADIUS Server
in this field.
6. Set the access rights for each user on the RADIUS server according to the
information in the table on the next page.
kh15816i.book Page 72 Wednesday, December 26, 2007 11:12 AM
