23
Troubleshooting
Problem
Solution
There are ghost images on
the external monitor.
The distance between the external console and the
CL5200 is too great. The maximum cable distance
should not exceed 20m and, in some cases, may need to
be shorter. Replace the VGA cable with one of an
appropriately short length.
When I try to perform
hotkey operations on my
KVM switch, nothing
happens.
If the KVM switch connected to the CL5200 uses the
[Ctrl] [Alt] [Shift] combination to invoke its hotkey mode,
you won't be able to access any of its hotkey operations.
The reason is that the CL5200 captures the combination
for console selection first (see page 16). You must use a
KVM switch that uses a different hotkey invocation
method.
cl5200-aam-v1.book Page 23 Thursday, January 25, 2007 3:36 PM
