CS1922M / CS1924M RS-232 Commands
5
Console Login - HyperTerminal
Once a physical connection from the computer to the CS1922M / CS1924M
has been made, you can establish a HyperTerminal session using the
instructions below.
1. Open the
HyperTerminal
application, and configure the port settings for
COM1 port, then click
OK
.
Bits per Second:
19200
, Data Bits:
8
, Parity:
None
, Stop bits:
1
, Flow Control:
None
.
2. After configuring the port settings you must enable serial control on the
switch by typing the command:
Open + [Enter]
.
