manualshive.com logo in svg

ATEN KL1108V, User Manual

The ATEN KL1108V User Manual is essential for operating and configuring your KL1108V device effectively. Easily download this comprehensive manual for free on 88.208.23.73:8080, ensuring you have all the necessary instructions and guidance to optimize the performance of your ATEN KL1108V product.

Share
Download
background image

KL1108V / KL1116V User Manual

x

User Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Access  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Device Level Browser GUI Interface . . . . . . . . . . . . . . . . . . . . . . . . . 119
Port Level Browser GUI Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Device Level AP GUI Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Port Level AP GUI Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Saving Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Port Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Device Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Port Level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Chapter 8.
User Management

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Browser GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
AP GUI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Users  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Adding Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Modifying User Accounts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Deleting User Accounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Creating Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Modifying Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Deleting Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Users and Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Assigning Users to a Group From the User’s Notebook . . . . . . . . . . 144
Removing Users From a Group From the User’s Notebook . . . . . . . 145
Assigning Users to a Group From the Group’s Notebook. . . . . . . . . 146
Removing Users From a Group From the Group’s Notebook. . . . . . 147

Device Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Assigning Device Permissions From the User’s Notebook . . . . . . . . 148
Assigning Device Permissions From the Groups’ Notebook. . . . . . . 151

Chapter 9.
Device Management

KVM Devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Device Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Operating Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
ANMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
OOBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Date/Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

PON Devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Configuration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Outlet Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

Summary of Contents for KL1108V
















































































































































































































































































































Reviews:

No comments

Related manuals for KL1108V

Keithley 3700 series Reference Manual preview
3700 series
Brand: Keithley Pages: 434
tbs electronics RBS Series Manual preview
RBS Series
Brand: tbs electronics Pages: 2
steute Ex 355 Mounting And Wiring Instructions preview
Ex 355
Brand: steute Pages: 20
WAGO 852-1102 Manual preview
852-1102
Brand: WAGO Pages: 36
PhD Solutions MXC-P442-HDTL Operation Manual preview
MXC-P442-HDTL
Brand: PhD Solutions Pages: 23
SUCO 0140 Series Operating Instructions preview
0140 Series
Brand: SUCO Pages: 2
ATEN CS428 User Manual preview
CS428
Brand: ATEN Pages: 26
M-system SHSP Instruction Manual preview
SHSP
Brand: M-system Pages: 4
KanexPro HDMX44A-18G Operation Manual preview
HDMX44A-18G
Brand: KanexPro Pages: 35
C&C TECHNIC VAX-8204F User Manual preview
VAX-8204F
Brand: C&C TECHNIC Pages: 2
KinAn DV2302 User Manual preview
DV2302
Brand: KinAn Pages: 5
Cumberland PowerTrak Installation preview
PowerTrak
Brand: Cumberland Pages: 2
Omega OM-ESW-105-POE User Manual preview
OM-ESW-105-POE
Brand: Omega Pages: 17
Santon D1-G/H-T Installation Manual preview
D1-G/H-T
Brand: Santon Pages: 16
IOGear CS1222TAA4 Manual preview
CS1222TAA4
Brand: IOGear Pages: 54
IBM 8271 F12 Quick Installation Manual preview
8271 F12
Brand: IBM Pages: 2
Oracle Sun Datacenter InfiniBand Switch 648 Installation Manual preview
Sun Datacenter InfiniBand Switch 648
Brand: Oracle Pages: 140
Barox PC-PIGE500-GBTE User Manual preview
PC-PIGE500-GBTE
Brand: Barox Pages: 8

Brands by name

Popular brands

Load more brands