Chapter 9. Device Management
162
SNMP Trap
To be notified of SNMP trap events, do the following:
1. Check
Enable SNMP Agent
.
2. Key in either the IPv4 address, IPv6 address, or domain name of the
computer to be notified of SNMP trap events.
3. Key in the port number. The valid port range is 1–65535.
Note:
The logs that are notified of SNMP trap events are configured on the
Notification Settings page under the Log tab. See
Syslog Server
To record all the events that take place on KVM over IP switches and write
them to a Syslog server, do the following:
1. Check
Enable
.
2. Key in either the IPv4 address, IPv6 address, or domain name of the
Syslog server.
3. Key in the port number. The valid port range is 1-65535.
