KL1108V / KL1116V User Manual
235
IPv6
At present, the KL1108V / KL1116V supports three IPv6 address protocols:
Link Local IPv6 Address
,
IPv6 Stateless Autoconfiguration
, and
Stateful
Autoconfiguration (DHCPv6)
.
Link Local IPv6 Address
At power on, the KL1108V / KL1116V is automatically configured with a Link
Local IPv6 Address (for example, fe80::210:74ff:fe61:1ef). To find out what
the Link Local IPv6 Address is, log in with the KL1108V / KL1116V IPv4
address and open the
Device Management
→
Device Information
page. The
address is displayed in the
General
list box (see page 153).
Once you have determined what the IPv6 address is, you can use it when
logging in from a browser or the Win and Java Client AP programs.
For example:
If you are logging in from a browser, you would key in
http://[fe80::2001:74ff:fe6e:59%5]
for the URL bar.
If you are logging in with the AP program, you would key:
fe80::2001:74ff:fe6e:59%5
for the
IP
field of the
Server
panel (see
Note:
1. To log in with the Link Local IPv6 Address, the client computer must
be on the same local network segment as the KL1108V / KL1116V
2. The %5 is the %interface used by the client computer. To see your
client computer’s IPv6 address: from the command line issue the
following command:
ipconfig /all
. The % value appears at the
end of the IPv6 address.
