38
Chapter 4
Super Administrator Setup
Overview
This chapter discusses the administrative procedures that the Super
Administrator performs to get the KVM over IP switch set up for the first time.
First Time Setup
Once the KVM over IP switch has been cabled up, the Super Administrator
needs to set the unit up for user operation. This involves setting the network
parameters, and changing the default Super Administrator login. The most
convenient way to do this for the first time is from the local console.
Note:
For remote methods of setting up the network, see
At the local console, a login prompt appears on the console monitor:
Since this is the first time you are logging in, use the default Username:
administrator
; and the default Password:
password
.
Note:
For security purposes, you should change these to a unique Username
and Password. (See
Changing the Super Administrator Login
for details.)
